Code: Civil-MCE-0282
COMPREHENSIVE GEARED SYSTEM.
GENERAL DESCRIPTION
The apparatus is used for studying the acceleration of a geared system as well as geared system efficiency under different gear ratios.
The system consists of three shafts, two stage spur gear unit with two fixed gear and two sliding gear sets. All shafts rest on ball bearings on a steel frame.
The first shafts has a cable drum for weight hanger.
The second shaft has an interchangeable inertia mass. A speed sensor monitors the mass speed.
A motor dynamometer measures the gear system input power. This motor dynamometer drives the first shaft via an electric clutch. Speed is controlled by an inverter.
A mechanical brake dynamometer is attached to the third shaft for measurement of the gear system output power.
For a study of acceleration of the geared system, a weight hanger provides torque on the cable drum and speed sensor can measure inertia mass velocity and acceleration.
The apparatus has a transparent cover with interlocks for safety protection. The unit is steel frame with adjustable footings.
TYPICAL EXPERIMENTS
TECHNICAL DATA
Gear | : | Spur gear module 2. |
Transmission ratio alternatives | : | 3 |
Weight hanger and weights | : | 1 lot. |
Inertia masses | : | 2 |
Speed control | : | 0.75 kW inverter for controlling motor speed. |
Power measurement | ||
-Torques | : | Digital display for input and output shafts. |
-Speeds | : | Digital display for input and output shafts. |
Power supply | : | 220 V, 1 Ph, 50 Hz. Other power supply is available on request. |
Accessories | : | Rubber pad and stop watch |
Net (unpacked) shipping dimensions WxLxH | : | 75 x 100 x 60 cm. |
Net Weight | : | Approx. 127 kg |